BUNN LogoNew BUNN Logo |
AD CardAn assembly consisting of computer chips and an instructional label. Used for loading advertising messages into the brewer. |
Air PumpUsed either to pressurize the hot water tank or create turbulence in a brewing chamber during the brew process. Used in equipment such as SmartWAVE and trifecta. |
Auger Drive Shaft AssemblyA shaft assembly containing torsion springs while engaged to a motor shaft will flex depending upon thickness of the product during auger rotation. |
Basin WrenchThe basin wrench is a multi-function tool that is used to rebuild various solenoid valves. |
Brew LockoutThe inability to initiate a brew if the water temperature is less than the ready temperature programmed into the brewer. |
BrewLOGIC®A programming feature that compensates for flow-rate variations to maintain consistent dispense levels when water quality is a consideration. |
BrewMETER®A programming feature that simplifies Pulse Brew and allows extraction manipulation with the touch of a button. |
BrewWISE®A programming feature with Radio Frequency Identification (RFID) communications between grinder, funnel and brewer for custom warmer and recipe management without error. Works in conjunction with SMART Hopper, SMART Funnel, and a Recipe Writer/Card. |
BrewWIZARD®A programming feature that provides quick access to the most utilized setup parameters including a lockout feature to prevent brewing when actual water temperature is below the Ready temperature. Features include: brew lockout, brew ounces, enable ads, enter service number and BrewMETER®. |